Finished the last of the sanding and epoxy barrier coating on the bottom and sides of the boat. The epoxy has 4 coats on it total outside. I assume it will be 5 mills thick once dry.
The yellow tape on the pontoon bottoms and at the bow bottom edge is the Kevlar 10" tape. It was hard to cut (3 blades) and the edges fray when sanded. I do not like the way the edges look; however, it serves a purpose and the bottom is not for looks but function.
I am working on the paint and camo colors still.
Next is to paint the bottom and flip it back over where I can finsh the fiberglass on the top and inside of the pontoons, sand it all and apply the barrier coats. Then onto top and interior painting and install all the electrical/etc.
No comments:
Post a Comment